Nebulizers
About Burgener Nebulizers
Most Burgener nebulizers are always in stock and can usually be prepared for same day or next day shipping. Check our inventory for more details.
Burgener nebulizers are made with the patented Enhanced Parallel Path Method.
US Patent # 6,634,572; Canadian Patent # 2,384,201
Nebulizers
Click on a Nebulizer to Add it to Your Cart
Our most versatile nebulizer for both ICP-OES and ICP-MS systems. Works for most samples and can handle high levels of particulates in samples.
PFA teflon capillaries, PEEK body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
Comes with a 1/4-28 fitting on the sample line.
ID (Microns): 500
Catalog #: PMM-2
A Teflon version of our most versatile nebulizer for both ICP-OES and ICP-MS systems, meant for more acidic solutions. Works for any type of sample and can handle high levels of particulates in samples.
PFA teflon capillaries, PTFE teflon body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers. Nebulizer includes sample line and gas line.
ID (Microns): 500
Catalog#: TMM 3500
A Teflon version of our most versatile nebulizer for both ICP-OES and ICP-MS systems, meant for more acidic solutions. Works for any type of sample and can handle high levels of particulates in samples.
PFA teflon capillaries, PTFE teflon body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
Comes with a 1/4-28 fitting on the sample line.
ID (Microns): 500
Catalog #: TMM-2
The Aureus is 100% High Purity PFA including the sample lines, 1/4-28 sample line fittings, the body and the inner capillaries. It can run all sample types.
Standard pressure: 35 – 45 PSI, with 1 L/min at 50 psi.
Handles sample flow rates from 50 µl/min up to 2 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 250
Catalog#: AU 6000
Very low flow nebulizer designed specifically for single cell and single particle analysis for ICP-MS.
PEEK capillaries, PTFE teflon & PEEK body.
Higher pressure than standard: 60 PSI for 1 L/min (must optimize with ICP-MS).
Handles sample flow rates from 5 µl/min to 1 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 175
Catalog #: SC-175
Low flow nebulizers designed for ICP-MS with very stable mists producing low RSD%.
PEEK capillaries, PTFE teflon & PEEK body.
Handles sample flow rates from 0.5 ml/min to 1.5 ml/min.
The X–175 operates at higher than standard pressures: 60 PSI for 1 L/min
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 175
Catalog #: X-175
Low flow nebulizers designed for ICP-MS with very stable mists producing low RSD%.
PEEK capillaries, PTFE teflon & PEEK body.
Handles sample flow rates from 0.5 ml/min to 1.5 ml/min.
The NX–175 operates at standard pressures: 40 PSI for 1 L/min (as required for the PE NexION and Varian / Brooker ICP-MS)
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 175
Catalog #: NX-175
Low flow nebulizers designed for ICP-MS, where all wetted parts are PFA. Very stable mist with low RSD%. Can be used for any sample type.
PFA capillaries, PFA teflon & PEEK body.
Higher pressure than standard: 60 PSI for 1 L/min (must optimize with ICP-MS).
Handles sample flow rates from 50 µl/min to 2 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 250
Catalog #: PFA 260
Designed for ICP-MS-CE interface. Excellent mist, can handle high level of particulates in sample. Designed for CE-ICP-MS analysis. Allows CE capillary to extend to tip of nebulizer for zero suction, zero back pressure CE interfacing with ICP-MS. Works best with a mini chamber.
PEEK capillaries, PTFE teflon body.
High pressure: 80 PSI for 1 L/min.
Handles very low flow sample rates from 0.1 ml/min to 2.5 ml/min.
With Alcohol solutions can operate down to .001 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 500
Catalog #: MM CE
Meant for very low sample flow for ICP-MS and ICP-OES. Only use for samples that are particulate free.
PFA teflon Capillaries, black PEEK body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.05 ml/min to 1.0 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 225
Catalog: # AM 5000
Designed for ultra low flow, the Enya Mist is meant for ICP-MS - HPLC interface and tiny samples. Produces very low oxides in ICP-MS. Can NOT handle high level of particulates in sample.
PEEK capillaries, PTFE teflon body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 200 nanoliters/minute to 200 µl/min.
Fits chambers as a direct replacement for glass concentric nebulizers. Straight chambers are better than cyclonic chambers: sample drops are lost in cyclonics on the wall beside the injection point.
ID (Microns): 60
Catalog #: EM 7000
Our most versatile nebulizer for both ICP-OES and ICP-MS systems. Works for most samples and can handle high levels of particulates in samples.
Teflon capillaries, PEEK body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers. Nebulizer includes sample line and gas line.
ID (Microns): 500
Catalog #: PMM 4000
Our most versatile nebulizer for both ICP-OES and ICP-MS systems. Works for most samples and can handle high levels of particulates in samples.
PFA teflon capillaries, PEEK body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
Comes with a 1/4-28 fitting on the sample line.
ID (Microns): 500
Catalog #: PMM-2
A Teflon version of our most versatile nebulizer for both ICP-OES and ICP-MS systems, meant for more acidic solutions. Works for any type of sample and can handle high levels of particulates in samples.
PFA teflon capillaries, PTFE teflon body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers. Nebulizer includes sample line and gas line.
ID (Microns): 500
Catalog#: TMM 3500
A Teflon version of our most versatile nebulizer for both ICP-OES and ICP-MS systems, meant for more acidic solutions. Works for any type of sample and can handle high levels of particulates in samples.
PFA teflon capillaries, PTFE teflon body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
Comes with a 1/4-28 fitting on the sample line.
ID (Microns): 500
Catalog #: TMM-2
Very large sample capillaries, designed for solutions with high levels of particulates, and slurries. The T2100 is essentially unpluggable with un-dissolved particles.
PFA teflon capillaries, PTFE teflon body.
Standard pressure: 45 PSI for 1 L/min.
Handles sample flow rates from 0.5 ml/min to 3.0 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 750
Catalog #: T 2100
Meant for very low sample flow for ICP-MS and ICP-OES. Only use for samples that are particulate free.
PFA teflon Capillaries, black PEEK body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.05 ml/min to 1.0 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers.
ID (Microns): 225
Catalog: # AM 5000
Our original standard nebulizer. Works well on most instruments. Fits most chambers. Best results are with Cyclonic Chambers.
These are available only to existing T2002 customers.
For most applications, the T2100 is a better nebulizer since it handles larger particles, lasts longer, and provides virtually the same intensities and stability.
ID (Microns): 450
Catalog: #T2002
Stainless Steel Industrial Nebulizer for hot environments, any length possible, 1/8" OD.
Low Pressure (45 psi) to very high pressure (5,000 psi), Low sample flow to high sample flow (10 µl/min to 5 mL/min), Enhanced Parallel Path design. Designed for Industrial Sprays.
This product is by order only. Please Contact Us for more information.
Teflon, high sample flow, high gas flow (50 - 100 L/min). Enhanced Parallel Path design. Designed for Industrial Sprays. Virtually unpluggable. Can run saturated solutions without salting. Still maintains small droplets with a median of 10 - 20 microns diameter. To differentiate the gas line and liquid line, we use a 4mm gas line and a 3 mm liquid line. The LB 80 and 100 are identical except that the LB 100 gas orifice is a bit larger ID than for the LB 80.
LB 80 50 - 100 L/min - 3000 ID (Microns)
LB 100 50 - 100 L/min - 3000 ID (Microns)
This product is by order only. Please Contact Us for more information.
Teflon, low pressure (35 - 45 psi), high sample flow. Enhanced Parallel Path design. Designed for Industrial Sprays. Virtually unpluggable. Can run saturated solutions without salting up.
This product is by order only. Please Contact Us for more information.
Industrial Nebulizer using analytical nebulizer design. Designed to run from 0.5 ml/min up to 10 ml/min. PFA nose and inner capillaries and all wetted parts. Peek body for strength and longevity. Sample Capillary: 750 microns.
The PFA 550 requires 5 to 10 L/min gas flows, depending on the required liquid flows. It is set to run 5 L/min at 50 psi. The PFA 550 can be used for any liquid.
This product is by order only. Please Contact Us for more information.
Selecting the Right Nebulizer
Not sure which nebulizer is right for you?
Check out our selection criteria
Nebulizer Care
To learn more about how to properly care for your nebulizer, click below
Our most versatile nebulizer for both ICP-OES and ICP-MS systems. Works for most samples and can handle high levels of particulates in samples.
Teflon capillaries, PEEK body.
Standard pressure: 50 PSI for 1 L/min.
Handles sample flow rates from 0.2 ml/min to 2.5 ml/min.
Fits regular chambers as a direct replacement for glass concentric nebulizers. Nebulizer includes sample line and gas line.
ID (Microns): 500
Catalog #: PMM 4000